ADB Safegate RELIANCE IQ L-852G(L), Руководство пользователя

Страница: 39 / 52

6.2.1.2 Replace a light engine in a 8" fixture
Remove
1. Disassemble the light fixture.
2. Detach and remove the LED board holder, including 4 screws from the body, using a 3 mm Allen key, see
Figure 14 .
Figure 14: Remove the LED board holder
Replace
1. Attach the new LED board holder, including screws. The screws on the LED holder shall be tightened gently in sequence,
following number 1-4, see Figure 15 .
2. Tighten the same screws to a torque of 4.5 Nm, following number 5-8, see Figure 15 .
Figure 15: Tighten screws
3. Connect the LED-cable(s) to the LED-board(s), note the cable orientation in the picture, see Figure 16 .
Figure 16: LED board
4. Assemble the light fixture.
UM-0197, Rev. 1.0, 2019/11/19 33
Copyright
©
ADB Safegate, All Rights Reserved