ADB Safegate RELIANCE IQ L-852G(L) Скачать руководство пользователя страница 21

Страница: 21 / 52

4.0 Installation

4.1 Tools required

The following tools are recommended for installation.

•

One Box spanner 16/17 mm

•

One torque wrench with a 16/17 mm socket

•

Two large flat headed screwdrivers for lifting the light fixture

•

One T20 Torx key

•

One brush or cloth

Note

Provided that the base intended to receive the light fixture has been properly installed, no other specific tool is

required.

4.2 Unpack the unit

To reduce the possibility of damaging the light assembly, unpack the RELIANCE light fixtures at the installation site. If damage

to any equipment is noted, file a claim form with the carrier immediately.
When receiving the light fixture, open the box and verify that the characteristics of the light fixture correspond to the design

requirements, such as type, color etc. When installing an IQ0 light fixture where the function is to be activated at a later stage,

make sure to register product information, such as PID/SN and position of the light fixture in, for example, a site

documentation table. The information is required for remote activation and administration of IQ functionality from a

substation.

4.3 Installation and removal of the 8" light fixture

Install the light fixture in the base
Installation instructions for the inset light fixtures as follows:

•

Light bases shall be installed with care to assure vertical & azimuth alignment of fixture.

•

Provide 60-90 cm / 2"-3" cable slack within light base to allow transformer servicing.

UM-0197, Rev. 1.0, 2019/11/19

Содержание RELIANCE IQ L-852G(L)















































Результаты поиска

Содержание RELIANCE IQ L-852G(L)

Отзывы:

Похожие инструкции для RELIANCE IQ L-852G(L)

Бренды по названию

Популярные бренды

ADB Safegate RELIANCE IQ L-852G(L), Руководство пользователя

Результаты поиска

Содержание RELIANCE IQ L-852G(L)

Отзывы:

Похожие инструкции для RELIANCE IQ L-852G(L)

Бренды по названию

Популярные бренды