Adastra Systems NPC-486E, Руководство пользователя

Страница: 17 / 105

10
3.1.1 Installing SIMM Modules
1. Insure that power to the system is off.
2. Carefully insert the SIMM module into the socket
at a 90
_
angle.
3. Slowly rotate the module to lie in the angled
socket. Apply pressure evenly, along the entire
length of the module.
4. The edges of the SIMM module should "click" as
the latches lock into place.
3.1.2 Removing SIMM Modules
1. Insure that power to the system is off.
2. Pull the latch tabs on both ends of the
socket back, away from the module. The
module will rotate slightly, to a position
free of the latches.
3. Rotate the module to 90.
4. Carefully pull the module out.
Rotate
Insert
2.
1.
Rotate
Remove
1.
2.
Latch
SIMM
Socket