Adaptrum ACRS 2.0 Скачать руководство пользователя страница 54

Страница: 54 / 64

2016.05.16

Adaptrum©

P a g e

54 | 64

[email protected]

2016

Adaptrum ACRS2.0 Quick Start Guide (International)

Log File, reading

Remote

To remote read the CLIENT log file, in the BASE GUI, go to the Link tab, Link List View sub-tab.

Select the desired target (right-click in Notes column); if there’s no name under Notes, right-click in the
empty space.

Right-click opens a pop-up; select the desired operation, e.g. Read Log.

This will open “aremote.log” in Notepad

SaveAs to the file name of your choice (and if desired, re-open with + or equivalent editor for
inspection)

Local

To read the local BASE log file, in the BASE GUI, go to the System Information tab and click

This will open a Notepad window as shown above; SaveAs desired.

If you get this warning

the file may be corrupt or have exceeded its allowed file space; contact Adaptrum support for help.

Содержание ACRS 2.0
































































Результаты поиска

Содержание ACRS 2.0

Отзывы:

Похожие инструкции для ACRS 2.0

Бренды по названию

Популярные бренды

Adaptrum ACRS 2.0, Быстрый старт

Результаты поиска

Содержание ACRS 2.0

Отзывы:

Похожие инструкции для ACRS 2.0

Бренды по названию

Популярные бренды