Adaptrum ACRS 2.0, Быстрый старт

Страница: 41 / 64

2016.05.16 Adaptrum© P a g e 41 | 64
support@adaptrum.com All Rights Reserved Worldwide
2016
Adaptrum ACRS2.0 Quick Start Guide (International)
Link Tab
This tab provides feedback on the quality of the established link. For the BASE, the GUI provides two
subtabs—a Chart and a List (selected by tabs in the lower left of the window).
Chart
The Link Chart provides both graphical and textual feedback on channel error rates.
Figure 22: GUI screenshot: Link Chart View
# FIELD DESCRIPTION
1 Graph type toggle
default = BER, click to toggle to Mbps available (mbits)
2 Downlink Metrics
connection rate (Mbps), PHY mode (QAM, QPSK), PER, packet errors (Err), Bit-Error-
Rate (BER), Power (dBm), and Noise (dBm)
3 Uplink Reset
click to reset Uplink Error Packet (Err Pkt) count (4
th
parameter)
4 Uplink Metrics
connection rate (Mbps), PHY mode (QAM, QPSK), PER, packet errors (Err), Bit-Error-
Rate (BER), Power (dBm), and Noise (dBm)
5 Client MAC Address
indicates which CLIENT was selected from Link List Notes column
6 Expand button
click to expand list of parameters reported (fields 2, 4)
7 Mod Rate Select
Click for modulation rate selection pull-down list (See Appendix Modulation Rates )
8 Graph
Downlink (green) and Uplink (red) Bit-Error-Rate or Mbps; scale is on the left
Table 3: Link Chart View Description
Reasonable connections exhibit the following metrics:

Phy mode = 64QAM

Power > -80dBm

greater than 10 dBm separation between Power and Noise
Note: The first metric reported in both fields 2 and 4 gives bandwidth utilization and availability,
respectively (e.g. here, Downlink utilization is 0.04 Mbps and availability is 5.31 Mbps).
A
P
P
EN
D
IX