Adaptrum ACRS 2.0 Скачать руководство пользователя страница 53

Страница: 53 / 64

2016.05.16

Adaptrum©

P a g e

53 | 64

[email protected]

2016

Adaptrum ACRS2.0 Quick Start Guide (International)

Configuration

To remote update CLIENT configuration, in the BASE GUI, go to the Link tab, Link List View sub-tab.

Right-click on desired target name in Notes column; if there’s no name under Notes, right-click in the
empty space (and add System Notes when the Remote Config window opens).

Right-click opens a pop-up;

select the desired operation, e.g. Update Configuration.

This opens the Remote Config window

Edit any/all fields as desired. See

MAC Address Specification

discussion to modify MAC Filter Table.

Make sure Auto Channel is checked so unit will auto-connect after reboot.

Save Settings to Remote and Reboot

Make sure

Auto Update

is not enabled when you do this.

Note: If the AdaptrumTVBD GUI is running on the target CLIENT, it will need to be restarted.

Содержание ACRS 2.0
































































Результаты поиска

Содержание ACRS 2.0

Отзывы:

Похожие инструкции для ACRS 2.0

Бренды по названию

Популярные бренды

Adaptrum ACRS 2.0, Быстрый старт

Результаты поиска

Содержание ACRS 2.0

Отзывы:

Похожие инструкции для ACRS 2.0

Бренды по названию

Популярные бренды