2016.05.16
Adaptrum©
P a g e
19 | 64
All Rights Reserved Worldwide
2016
Adaptrum ACRS2.0 Quick Start Guide (International)
MAC Address Specification
Change to Installation tab to add MAC Address(es) to the filtering table
The CLIENT MAC Address filtering table allows the BASE to find and restrict all traffic to just those
addresses specified in the filter table.
..default MAC shown
Pull down MAC Address list (green highlight)
Select MAC Address(es) to add; (in this example there is only one, the CPE laptop); Add
This adds the selected MAC Address to the filtering table;
The default MAC address should be removed from the table. Select the old default MAC Address.
Remove
In the above example, the Filter Table now contains a single MAC address (20-47-47-aa-02-10), which in this case,
is for the laptop connected to the CLIENT.
Save All Settings to Target and Reboot
C
LIE
N
T
SE
TUP
