Adaptec ARO-1130CA, Инструкция по установке и эксплуатации оборудования, Страница: 60 / 78

A-8
ARO-1130CA Installation and Hardware Guide
4
When the Install from Disk dialog box appears, type
A:\winnt
on the command line and click OK.
5
Select Adaptec Adaptec AHA-294x/AHA-394x or AIC-78xx
PCI SCSI Controller
and click OK.
6
When a message appears asking you if you want to restart
Windows NT, click No.
7
Exit from Control Panel.
Changing Registry Settings
1
Back up the NT Registry, using one of the techniques described
in Backing up the Windows NT Registry on page A-10
Caution:
It is very important to back up the NT Regis-
try before you make any changes to it. This allows you
to restore the original NT Registry settings if there is a
problem with the new configuration.
2
Run the Registry Editor ( regedit.exe ).
3
When the Registry Editor window appears, expand the tree on
the left until you can see the nodes under
\HKEY_LOCAL_MACHINE\System\CurrentCon-
trolSet\Services.
4
Select cda1000 on the left part of the screen. Write down the
cda1000 Tag value that appears on the right part of the screen.
The Tag value is a hex number followed by an equivalent deci-
mal equivalent in brackets: for example, 0x00000002 [2].
5
Select aic78xx on the left part of the screen. Write down the
aic78xx Tag value that appears on the right part of the screen.
6
Expand the tree on the left until you can see the nodes under
\HKEY_LOCAL_MACHINE\System\CurrentCon-
trolSet\Control\GroupOrderList.
7
Select GroupOrderList.
8
Click the right mouse button on SCSI Miniport on the right
side of the window and select Modify from the popup menu.