Adaptec ARO-1130CA Скачать руководство пользователя страница 41 | Manualshive

Страница: 41 / 78

Adaptec ARO-1130CA Скачать руководство пользователя страница 41

4-3

Installing Software on a Windows NT System

3

Press S to skip autodetection of your SCSI host adapter.

4

Press S again to specify an additional device.

5

Press Enter to select

Others

; insert the Adaptec Array100

Family Manager Set drivers diskette in your floppy disk drive.

6

The screen displays the adapter drivers supported on the
diskette. Select the

Adaptec Array1000CA Family Adapter

and

press Enter.

7

If you want to add drivers for other host adapters (other than
the ARO-1130CA), do so at this time by pressing S and repeat-
ing Step 5 for each additional adapter and inserting the appro-
priate disk provided by the hardware manufacturer.

8

Press Enter to continue with the Windows NT operating
system setup. Follow the onscreen instructions in the Windows
NT documentation to complete the installation.

Installing the Driver When Windows NT is Already Installed

To update or install the

cda1000.sys

driver if Windows NT is

already installed, follow the instructions below.

Updating Windows NT 4.0

To install the

cda1000.sys

driver when Windows NT 4.0 is already

installed, follow these steps:

1

Start Windows NT.

2

Click the Start button on the Windows NT task bar, and then
point to Settings.

3

Click the Control Panel.

4

Double-click the SCSI Adapters icon.

5

Click the Drivers tab, and then click the Add button.

6

In the Install Driver window, click the Have Disk button.

7

Insert the Adaptec Array1000CA Family Manager Set drivers
diskette into drive A; enter the following path to the installa-
tion files and then click OK.

a:\winnt

The

Adaptec Array1000CA Family Adapter

is highlighted by

default.

«
...
39
40
41
42
43
...
»

Содержание ARO-1130CA















































































Отзывы:

Нет отзывов