Adaptec ARO-1130CA, Инструкция по установке и эксплуатации оборудования, Страница: 57 / 78

A-5
Troubleshooting
Changing Registry Settings
1
Back up the NT Registry, using one of the techniques described
in Backing up the Windows NT Registry on page A-10
Caution:
It is very important to back up the NT Regis-
try before you make any changes to it. This allows you
to restore the original NT Registry settings if there is a
problem with the new configuration.
2
Run the Registry Editor ( regedit.exe ).
3
When the Registry Editor window appears, expand the tree on
the left until you can see the nodes under
\HKEY_LOCAL_MACHINE\System\CurrentCon-
trolSet\Services.
4
Select cda1000 on the left part of the screen. Write down the
cda1000 Tag value that appears on the right part of the screen.
The Tag value is a hex number followed by an equivalent deci-
mal equivalent in brackets: for example, 0x00000002 [2].
5
Select aic78xx on the left part of the screen. Write down the
aic78xx Tag value that appears on the right part of the screen.
6
Expand the tree on the left until you can see the nodes under
\HKEY_LOCAL_MACHINE\System\CurrentCon-
trolSet\Control\GroupOrderList.
7
Select GroupOrderList.
8
Click the right mouse button on SCSI Miniport on the right
side of the window and select Modify from the popup menu.
A table appears with columns of two- and four-number
groups, something like this:
0005 02 00 00 00 03 00 00 00
0010 01 00 00 00 01 01 00 00
0015 04 00 00 00 05 00 00 00
0020 06 00 00 00 07 00 00 00
etc.