Adaptec 1130U2 - Storage Controller RAID)- U2W SCSI 80 MBps, Инструкция по установке и эксплуатации оборудования

Страница: 78 / 82

D-4
ARO-1130U2 Installation and Hardware Guide
❒
Command Line Options for aspicd.sys
Option Example Use
/d: <name> /d:aspicd0 Required in the config.sys command line. Assigns a name
to the CD-ROM drive so that mscdex can assign the
CD-ROM a logical drive letter. The name must exactly
match the CD-ROM drive name in the
mscdex command
line in autoexec.bat. Use any eight-character name.
/id=
{…}
/id=2+4
/id=3+5+1:4 Specifies CD-ROM drives controlled by
aspicd. By
default, aspicd controls all drives. In the first example,
which is for a computer with one host adapter,
aspicd con-
trols the devices with SCSI IDs 2 and 4. In the second
example, for a computer with two host adapters,
aspicd
controls the devices with SCSI IDs 3 and 5 on host
adapter 0 and SCSI ID 4 on host adapter 1 (if you do not
specify the host adapter number,
aspicd assumes it is 0).
/L /L Enables aspicd to recognize all eight possible LUNs asso-
ciated with each SCSI ID. If the option is not used, aspicd
can recognize only LUN 0 for each SCSI ID. Add the /L
option to the command line if you have a CD-ROM drive
that can access multiple discs.
If your computer system includes a Pioneer DRM-600 or
DRM-604x multiple-disc CD-ROM drive, you do not need
to add the /L option. The
aspicd device driver automati-
cally scans multiple LUNs if it detects one of these
devices on the SCSI bus.
/norst /norst Prevents aspicd from issuing a SCSI Bus Reset message
at system start-up. The default is to issue it. The SCSI
Bus Reset message (supported by Toshiba, Hitachi, and
NEC drives) resets drives that are playing audio CDs
when the computer reboots.
/pause /pause Makes your system pause after loading
aspicd at bootup,
so you can read the message on the screen. Press any
key to resume booting.
/type: <drive
vendor>
/type:sony Allows aspicd to support audio play mode for CD-ROM
drives that are compatible with a supported drive type but
are not included on the list of supported drives. If you use
the /type:
<drive vendor> option, aspicd assumes that all
CD-ROM drives on the SCSI bus are made by this ven-
dor—you cannot combine different brands of CD-ROM
drives on the bus. The valid entries for this option are
chinon, denon, hitachi, lms, nec, panasonic, sony, texel,
and toshiba.