Adaptec 1130U2 - Storage Controller RAID)- U2W SCSI 80 MBps, Инструкция по установке и эксплуатации оборудования

Страница: 67 / 82

B-7
Using the ARO-1130U2 with Other Adaptec Products
Changing Registry Settings
1
Back up the NT Registry, using one of the techniques described
in Backing up the Windows NT Registry on page B-10.
Caution:
It is very important to back up the NT Regis-
try before you make any changes to it. This allows you
to restore the original NT Registry settings if there is a
problem with the new configuration.
2
Run the Registry Editor ( regedit.exe ).
3
When the Registry Editor window appears, expand the tree on
the left until you can see the nodes under
\HKEY_LOCAL_MACHINE\System\CurrentControlSet\Ser-
vices
.
4
Select cda1000 on the left part of the screen. Write down the
cda1000 Tag value that appears on the right part of the screen.
The Tag value is a hex number followed by an equivalent deci-
mal equivalent in brackets: for example, 0x00000002 [2].
5
Select aic78xx on the left part of the screen. Write down the
aic78xx Tag value that appears on the right part of the screen.
6
Expand the tree on the left until you can see the nodes under
\HKEY_LOCAL_MACHINE\System\CurrentControlSet\Con-
trol\GroupOrderList
.
7
Select GroupOrderList.