Adaptec 1130U2 - Storage Controller RAID)- U2W SCSI 80 MBps, Инструкция по установке и эксплуатации оборудования

Страница: 64 / 82

B-4
ARO-1130U2 Installation and Hardware Guide
3
When the Registry Editor window appears, expand the tree on
the left until you can see the nodes under
\HKEY_LOCAL_MACHINE\System\CurrentControlSet\Ser-
vices
.
4
Select cda1000 on the left part of the screen. Write down the
cda1000 Tag value that appears on the right part of the screen.
The Tag value is a hex number followed by an equivalent deci-
mal equivalent in brackets: for example, 0x00000002 [2].
5
Select aic78xx on the left part of the screen. Write down the
aic78xx Tag value that appears on the right part of the screen.
6
Expand the tree on the left until you can see the nodes under
\HKEY_LOCAL_MACHINE\System\CurrentControlSet\Con-
trol\GroupOrderList
.
7
Select GroupOrderList.
8
Click the right mouse button on SCSI Miniport on the right
side of the window and select Modify from the pop-up menu.
A table appears with columns of two- and four-number
groups, something like this:
0005 02 00 00 00 03 00 00 00
0010 01 00 00 00 01 01 00 00
0015 04 00 00 00 05 00 00 00
0020 06 00 00 00 07 00 00 00
etc.
This table of hexidecimal numbers indicates the Tag-value
sequence in which the SCSI Miniport drivers are loaded when
you start Windows NT.
9
Determine what the Tag value loading sequence is. Here is
how you do this:
a
Ignore the four-digit groups on the left of each row.
b
Going from left to right, and starting on the first row,
divide the two-digit numbers into groups of eight. In this
example, the groups are
02 00 00 00
03 00 00 00
01 00 00 00