Adaptec 1130U2 - Storage Controller RAID)- U2W SCSI 80 MBps, Инструкция по установке и эксплуатации оборудования

Страница: 75 / 82

D-1
D
▼ ▼ ▼ ▼
Using a CD-ROM Drive
Should you need to install a SCSI CD-ROM, the Array1000U2 Fam-
ily Manager Set drivers diskette included with the ARO-1130U2 con-
tains the DOS driver software you need in order to use a CD-ROM
controlled by the ARO-1130U2. This appendix explains how to set
up your CD-ROM drive so that you can initially install your
software.
Using a CD-ROM Drive with DOS
To operate a CD-ROM drive supported by the ARO-1130U2 under
DOS, you need
■
The SCSI driver,
aspi8u2.sys
(for Ultra2 systems) or
aspi8dos.sys
(for non-Ultra2 systems)
■
The CD-ROM driver, aspicd.sys
■
The Microsoft CD-ROM extensions, mscdex.exe
The aspi8u2.sys (or aspi8dos.sys ) and aspicd.sys files must be cop-
ied from the \dos directory on the Adaptec Array1000U2 Family
Manager Set driver diskette to a directory (e.g., c:\scsi ) on your hard
disk drive. The mscdex . exe file is included with MS-DOS 6.x and
above (see your MS-DOS documentation for details).
Note:
If you use MS-DOS 5 and do not have mscdex.exe , we
recommend that you upgrade to MS-DOS 6 or above. You
can also obtain
mscdex.exe from Microsoft’s Web site,
online bulletin board, or the CompuServe forum.