Adam Equipment NCSA 20plus, Руководство по обслуживанию

Страница: 6 / 20

5
Adam Equipment Company 2012
2.4 DUBIOUS NOTE DETECTION
The Magnetism (MG) and Ultraviolet (UV) functions are automatically enabled
on Power up, these functions detect counterfeit notes as the counting process
is performed.
The MG and UV LED’s will be on.
The degree of sensitivity for these can be set by the USER to customise how
they work.
Please see section 5.1 for more details.
When a counterfeit note is detected by the MG sensor the counting process
will stop, the counter will BLEEP and the error message E3 will be displayed
until the note is removed from the holder. Remove the counterfeit note and
press [START] to continue counting.
When a counterfeit note is detected by the UV sensor the counting process will
stop, the counter will BLEEP and the error message E2 will be displayed until
the note is removed from the holder. Remove the counterfeit note and press
[START] to continue counting.
The last note in the holder will always be the counterfeit one.
The MG and UV functions can be de activated by pressing the [MG] and/or [UV]
key once whereby the LED’s will go off.
Chain and half note detection are also enabled and have error codes to
determine which type of detection has been made.
When a detection for any of these have been made please note that the faulty
note will still have been included in the total count on the Main display.
Remove the faulty note and press [START] to resume counting.
Please see error code table in section 6.2 for more details.