Adam Equipment NCSA 20plus, Руководство по обслуживанию

Страница: 4 / 20

3
Adam Equipment Company 2012
2.0 OPERATION
2.1 COUNTING FUNCTION
To count the notes place them in between the guides at the rear of the
machine. The sensor will detect the notes and feed them through displaying
the number of notes counted on the Main Display.
2.2 BATCH FUNCTION
The BATCH function allows you to count a pre determined number of notes.
When in BATCH mode the BATCH LED will light up.
Press the [BATCH] key and the BATCH display will show 100, use the [+] key to
increase the amount by 1, and the [-] key to decrease the amount by 10 to the
figure that you require for each BATCH.
Place the notes into the guides at the rear of the machine and the counter will
feed through the required amount and stop. The Main display should display
and match that of the BATCH display with the correct amount of notes being
in the holder at the front of the machine.
When the notes are removed the counting automatically resumes and feeds
through the remaining notes until the required figure is met again. Remove
the second BATCH and continue until all of the notes are counted.
If there are not enough notes to reach the required amount for a BATCH the
Main display will display a flashing figure of how many notes have been
counted so far. Place more notes into the machine to continue until the
BATCH figure is reached.
Press the [BATCH] key to return to normal counting and the LED will go out.