17
© Adam Equipment Company 2012
7.1
ENABLING
WEIGHING
UNITS,
F1
F1
F1
F1
U
U
U
U
N
N
N
NTTTT
You can enable and disable the weighing units available to the user when they press
the
[Unit/Clr]
key
as described in section
4.4 Weighing Units
.
1)
Switch on the balance then press and hold the
[Unit/Clr]
key during the self-
checking test of the display.
2)
After a few seconds, the display will show the first function
F1 Unt
.
3)
When
F1
Unt
is displayed you can press the
[Unit/Clr]
key to return to normal
weighing or press
[Air/Liquid]
to go to the next function.
4)
When
F1
Unt
is displayed you can press the
[Tare]
key to view the current
setting for the weighing units.
5)
Press
[Unit/Clr]
at any time to return to the parameter heading.
6)
Pressing the
[Hold/Print]
key will cycle through the other units along with
their current settings. For example, if
oFF
is displayed with the weighing unit
Carats, the user will not be able to use this unit while weighing.
7)
Pressing the
[Air/Liquid]
key
will change the setting of a particular unit. For
example, to enable the weighing unit Carats, change the setting to
on
by
pressing the
[Air/Liquid]
key.
8)
Note that grams will always be enabled.
