manualshive.com logo in svg

Ada PTM-6150, Руководство по эксплуатации и установке

Поделиться
Скачать
Ada PTM-6150 Скачать руководство пользователя страница 59

Page 58

The Repeat count is used on Dolby Digital (AC-3) modes and can
be set independently per input, which is set to an AC-3 mode.  The
Cinema Reference’s “Out Of The Box” Setup has the Repeat Count
set to “1”.  If you wish to alter this setting, you can increase the
Repeat Count as high as 8.

1

While in the Pro Setup Mode, turn the MODE knob until the

display reads REPEAT COUNT and then press the MODE
knob.  The Cinema Reference’s display will read REPEAT
COUNT on the top line and the second line will read a
number (1) followed by the word COUNT.

2

Turn the MODE knob until the display reads the desired set-

ting for the Repeat Count (1-8).  Since each Input that is
on an AC-3 mode has its own Repeat Count, you can set
the Repeat Count for other Input Labels by turning the
INPUT knob, thus scrolling through all inputs.

3

To exit the REPEAT COUNT Setup Modes without leaving

the Pro Setup Mode, press the MODE knob.  If you wish
to exit the Setup Mode completely, turn any of the knobs
other than MODE or INPUT.

Pro Setup - Repeat Count

The REPEAT COUNT is a
function that is directly related
to the Dolby Digital (AC-3)
Surround Mode.  The Repeat
Count setting indicates the
maximum number of
consecutive block repeats
before muting the output.  The
Out Of The Box setup for
repeat count is set to 1.  The
maximum setting is 8.

Содержание PTM-6150



































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды