Page 28
For CD Players that sport a
Digital output, you may select
to alter the Cinema
Reference’s “Out Of The Box”
setup to switch the audio for
the CD Player to a digital input
that is not used.
1
Turn the Input knob to
CD PLAYER 7 and press the
knob.
2
Turn the Mode knob
clockwise to SETUP MODE
and press the knob.
3
Turn the Mode knob to
AUDIO INPUT and press the
knob. Once the knob is
pressed the display will read
“ANALOG IN 7”.
4
Turn the mode knob
until the display reads the cor-
responding digital input that
you have connected your CD
Player to and press the knob.
Connection 2
Connection 1
The Cinema Reference is preprogrammed to permit you to easily
connect a CD.
Standard RCA interconnects are used for the audio connection while
a 75
Ω
coax cable is used for the video connection.
Connection 1 - CD Audio Output - You will need to connect the CD’s
audio output (stereo RCA type) to the Cinema Reference’s Audio
Input #7.
Connection 2 (Optional) - CD Player’s Video Output - You will need
to connect the CD’s video output (Composite Video) to the Cinema
Reference’s #7 Video Input.
Please note, not all CD players offer a video output and as such, the
Cinema Reference’s #7 Video Output can be used with an audio
input that is not used. To custom configure your Cinema Reference,
see the section titled “Custom Setup”.
CD Player
1
1
2
2
3
4
3
5
6
4
7
8
5
1
2
6
REC
OSD
MAIN
REC
1
7
8
REC
2
3
4
L
R
LS
RS
SUB
C
L
R
L
R
L
R
L
R
OUT
AUDIO OUTPUTS
AUDIO INPUTS
VIDEO INPUTS
VIDEO OUT
S-VIDEO OUT
1
2
3
4
DIGITAL AUDIO INPUTS
S-VIDEO INPUTS
LOW VOLTAGE
AC INPUT
115V-60Hz/230V-50Hz
AC OUTPUT
10A Max Switched
ADA Bus™
1 2 3 4
DATA PORT
Serial Data
12VDC OUT
100mA Max Per
DC 1
1- 2+
DC 2
1- 2+
HDTV/RGB
COMPONENT
VIDEO
SWITCHER
Use With DVD
Players or
Digital Video
Tape Players
1
2
OUT
Y
Cr
Cb
LASER DISC PLAYER
Dolby Digital (AC-3)
RF Switcher & AC-3
RF Demodulator
1
2
Connections!
In order to play an AC-3 Laser
Disc, you must connect the Digital
AC-3 Output to a Digital Audio
Input (RCA Type Coax) below.
DC Input Mute Switch
OFF
ON
CAUTION: Disconnect Supply Cord Before Servicing.
ATTENTION: Debrancher Avant Le Depannage.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
ATTENTION!
RISQUE DE CHOC ELECTRIQUE.
NE PAS OUVRIR
MADE IN U.S.A.
WARNING! Risk Of Hazardous Energy!
Make Proper Connections.
AVERTISSEMENT! Energie Electrique Dangereuse!
Faire Des Connexions Propres Pour L'Hautparleur.
Voir La Notice De Fonctionnement.
Use Same
Value Fuse
115V-1AS.B.
230V-.5AS.B.
Voltage
Selector &
Safety Fuse
On This Side
115 V
115V
230V
15
Manufactured under license from Dolby Laboratories Licensing Corp.
"Dolby", "Dolby Digital", "Pro Logic", & the Double-D Symbol are the trademarks of Dolby Laboratories Licensing Corp.
Manufactured under license from DTS Technology, LLC. DTS Digital Surround is a trademark of DTS Technology LLC.
Manufactured under license from Lucasfilm Ltd. U.S. patent numbers 5,043,970; 5,189,703; and 5,222,059.
Foreign patents pending. Lucasfilm and THX are registered trademarks of Lucasfilm Ltd.,
Cinema Reference
1
2
3
OPTICAL INPUTS
In order to play an AC-3 Laser Disc,
you must connect the Digital AC-3
Output to a Digital Audio Input.
CD Player
Stereo
Audio Out
R
L
Video
Out
Video
Cable
Stereo AudioCable
(This cable carries standard 2 channel audio)
7
7L
7R
The CD Player Input
allows for a video signal
in the event the CD Player
offers an on-screen display
or is used with a CD Library
system that offers an
on-screen readout.
