Page 25
VCR
The Cinema Reference is preprogrammed to permit you to easily
connect a VCR. You will need to make only one audio connection to
play video tapes.
Standard RCA interconnects are used for the audio connection while
a 75
Ω
coax cable is used for the video connection.
Connection 1 - VCR Audio Output - You will need to connect the
VCR’s audio output (stereo RCA type) to the Cinema Reference’s
Audio Input #4.
Connection 2 - VCR Player’s Video Output - You will need to con-
nect the VCR’s video output (Composite Video) to the Cinema
Reference’s #4 Video Input.
Connection 3 (Optional) - VCR’s S-Video Output - You may also
choose to connect the S-Video (Super Video) output of the VCR to
the Cinema Reference’s #4 S-Video Input. This will require a spe-
cial super video cable. Please note, if your projector or TV does not
have a super video input, you will not need to make this connection
as the Cinema Reference does not cross convert S-Video to Com-
posite Video.
Connection 3
Connection 2
Connection 1
1
1
2
2
3
4
3
5
6
4
7
8
5
1
2
6
REC
OSD
MAIN
REC
1
7
8
REC
2
3
4
L
R
LS
RS
SUB
C
L
R
L
R
L
R
L
R
OUT
AUDIO OUTPUTS
AUDIO INPUTS
VIDEO INPUTS
VIDEO OUT
S-VIDEO OUT
1
2
3
4
DIGITAL AUDIO INPUTS
S-VIDEO INPUTS
LOW VOLTAGE
AC INPUT
115V-60Hz/230V-50Hz
AC OUTPUT
10A Max Switched
ADA Bus™
1 2 3 4
DATA PORT
Serial Data
12VDC OUT
100mA Max Per
DC 1
1- 2+
DC 2
1- 2+
HDTV/RGB
COMPONENT
VIDEO
SWITCHER
Use With DVD
Players or
Digital Video
Tape Players
1
2
OUT
Y
Cr
Cb
LASER DISC PLAYER
Dolby Digital (AC-3)
RF Switcher & AC-3
RF Demodulator
1
2
Connections!
In order to play an AC-3 Laser
Disc, you must connect the Digital
AC-3 Output to a Digital Audio
Input (RCA Type Coax) below.
DC Input Mute Switch
OFF
ON
CAUTION: Disconnect Supply Cord Before Servicing.
ATTENTION: Debrancher Avant Le Depannage.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
ATTENTION!
RISQUE DE CHOC ELECTRIQUE.
NE PAS OUVRIR
MADE IN U.S.A.
WARNING! Risk Of Hazardous Energy!
Make Proper Connections.
AVERTISSEMENT! Energie Electrique Dangereuse!
Faire Des Connexions Propres Pour L'Hautparleur.
Voir La Notice De Fonctionnement.
Use Same
Value Fuse
115V-1AS.B.
230V-.5AS.B.
Voltage
Selector &
Safety Fuse
On This Side
115 V
115V
230V
15
Manufactured under license from Dolby Laboratories Licensing Corp.
"Dolby", "Dolby Digital", "Pro Logic", & the Double-D Symbol are the trademarks of Dolby Laboratories Licensing Corp.
Manufactured under license from DTS Technology, LLC. DTS Digital Surround is a trademark of DTS Technology LLC.
Manufactured under license from Lucasfilm Ltd. U.S. patent numbers 5,043,970; 5,189,703; and 5,222,059.
Foreign patents pending. Lucasfilm and THX are registered trademarks of Lucasfilm Ltd.,
Cinema Reference
1
2
3
OPTICAL INPUTS
In order to play an AC-3 Laser Disc,
you must connect the Digital AC-3
Output to a Digital Audio Input.
VCR
Stereo
Audio Out
R
L
Video
Out
S-Video
Output
Optional S-Video Cable
(Only functional if you connect your TV or Projector
to the Cinema Reference's "Main" S-Video Output.)
Video
Cable
Stereo AudioCable
(This cable carries standard 2 channel audio)
4
4L
4R
4
The “Out Of The Box” setup
for your VCR permits you
connect R&L Stereo Audio as
well as both composite video
and super video.
Your VCR may also include a
super video output. Please
note, the Cinema Reference
does not cross mix video
signals. As such, if you wish
to use a component’s S-Video
output, you will need to
connect an S-Video cable
from the Cinema Reference to
the TV or Projector.
