Page 16
Rear Panel Inputs & Outputs
All rear panel connections are
clearly marked such that all
inputs are situated in a black
field which is bordered and
labeled in white and all
outputs are on a white field
labeled in black. Each type of
area is designated by input
type.
The Cinema Reference’s rear panel connections provide ample com-
ponent connectors (inputs) for a wide variety of equipment. The fol-
lowing pages show the factory default “Out Of The Box” input set-
tings for the Cinema Reference. When proceeding to connect your
components to the Cinema Reference, ADA suggests using these
settings, however, you may also select to customize your Cinema
Reference to provide any type of input combination. As a reminder,
the Cinema Reference is preprogrammed for optimum operation right
“Out Of The Box”.
Before you proceed, it will be useful to determine what type of com-
ponents you intend to connect to the Cinema Reference. Once you
have selected the components, you will want to determine what con-
nectors these devices feature and how to best connect them to the
Cinema Reference. If you are uncertain as to what jacks to use,
ADA suggests contacting your local Authorized ADA Retailer or Cus-
tom Installation Professional for technical support. Should you have
any questions on the Cinema Reference, you can receive factory
support by calling Audio Design Associates, Inc. at 1-800-43-AUDIO
(1-800-432-8346), between the hours of 9am-5pm, eastern time,
Monday-Friday.
As a starting point, ADA suggests using the “Out Of The Box” con-
figuration to begin making your source connections. If the “Out Of
The Box” setup needs further modification to perfectly customize your
home theater system, the Cinema Reference also permits “Custom
Setup” that allows for hundreds of potential setups.
1
1
2
2
3
4
3
5
6
4
7
8
5
1
2
6
REC
OSD
MAIN
REC
1
7
8
REC
2
3
4
L
R
LS
RS
SUB
C
L
R
L
R
L
R
L
R
OUT
AUDIO OUTPUTS
AUDIO INPUTS
VIDEO INPUTS
VIDEO OUT
S-VIDEO OUT
1
2
3
4
DIGITAL AUDIO INPUTS
S-VIDEO INPUTS
LOW VOLTAGE
AC INPUT
115V-60Hz/230V-50Hz
AC OUTPUT
10A Max Switched
ADA Bus™
1 2 3 4
DATA PORT
Serial Data
12VDC OUT
100mA Max Per
DC 1
1- 2+
DC 2
1- 2+
HDTV/RGB
COMPONENT
VIDEO
SWITCHER
Use With DVD
Players or
Digital Video
Tape Players
1
2
OUT
Y
Cr
Cb
LASER DISC PLAYER
Dolby Digital (AC-3)
RF Switcher & AC-3
RF Demodulator
1
2
Connections!
In order to play an AC-3 Laser
Disc, you must connect the Digital
AC-3 Output to a Digital Audio
Input (RCA Type Coax) below.
DC Input Mute Switch
OFF
ON
CAUTION: Disconnect Supply Cord Before Servicing.
ATTENTION: Debrancher Avant Le Depannage.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
ATTENTION!
RISQUE DE CHOC ELECTRIQUE.
NE PAS OUVRIR
MADE IN U.S.A.
WARNING! Risk Of Hazardous Energy!
Make Proper Connections.
AVERTISSEMENT! Energie Electrique Dangereuse!
Faire Des Connexions Propres Pour L'Hautparleur.
Voir La Notice De Fonctionnement.
Use Same
Value Fuse
115V-1AS.B.
230V-.5AS.B.
Voltage
Selector &
Safety Fuse
On This Side
115 V
115V
230V
15
Manufactured under license from Dolby Laboratories Licensing Corp.
"Dolby", "Dolby Digital", "Pro Logic", & the Double-D Symbol are the trademarks of Dolby Laboratories Licensing Corp.
Manufactured under license from DTS Technology, LLC. DTS Digital Surround is a trademark of DTS Technology LLC.
Manufactured under license from Lucasfilm Ltd. U.S. patent numbers 5,043,970; 5,189,703; and 5,222,059.
Foreign patents pending. Lucasfilm and THX are registered trademarks of Lucasfilm Ltd.,
Cinema Reference
1
2
3
OPTICAL INPUTS
In order to play an AC-3 Laser Disc,
you must connect the Digital AC-3
Output to a Digital Audio Input.
Composite
Video
Inputs
Super
Video
Inputs
Super
Video
Outputs
Composite
Video
Outputs
Laser Disc
RF AC-3
Inputs
Component
Video (RGB)
Inputs
Component
Video (RGB)
Outputs
Laser Disc
Demodulated
AC-3 Output
Record
Audio
Output
Analog
Audio (R/L)
Inputs
Six Channel
Home Theater
Audio Output
Digital Optical
Audio
Inputs
Digital
Coax Audio
Inputs
ADA Bus™
Data
Port
Low
Voltage
Triggers
Switched
AC
Outlet
