Page 21
1
1
2
2
3
4
3
5
6
4
7
8
5
1
2
6
REC
OSD
MAIN
REC
1
7
8
REC
2
3
4
L
R
LS
RS
SUB
C
L
R
L
R
L
R
L
R
OUT
AUDIO OUTPUTS
AUDIO INPUTS
VIDEO INPUTS
VIDEO OUT
S-VIDEO OUT
1
2
3
4
DIGITAL AUDIO INPUTS
S-VIDEO INPUTS
LOW VOLTAGE
AC INPUT
115V~60Hz/230V~50Hz
AC OUTPUT
10A~ Max Switched
ADA Bus™
1 2 3 4
DATA PORT
Serial Data
12VDC OUT
100mA Max Per
DC 1
1- 2+
DC 2
1- 2+
CAUTION: Disconnect Supply Cord Before Servicing.
ATTENTION: Debrancher Avant Le Depannage.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
ATTENTION!
RISQUE DE CHOC ELECTRIQUE.
NE PAS OUVRIR
MADE IN U.S.A.
WARNING! Risk Of Hazardous Energy!
Make Proper Connections.
AVERTISSEMENT! Energie Electrique Dangereuse!
Faire Des Connexions Propres Pour L'Hautparleur.
Voir La Notice De Fonctionnement.
Use Same
Value Fuse
115V~1AS.B.
230V~.5AS.B.
Voltage
Selector &
Safety Fuse
On This Side
115 V
115V
230V
"Dolby", "AC-3", "Pro Logic", & the double-D Symbol are trademarks of Dolby Laboratories. Confidential Unpublished Works.
©1992-1997 Dolby Laboratories, Inc. All rights reserved. Manufactured under license from Digital Theater Systems, Inc. US Pat. No.
5,451,942 and other worldwide patents issues and pending. "DTS" and "DTS Digital Surround" are trademarks of Digital Theater
Systems, Inc. © 1996 Digital Theater Systems, Inc. All rights reserved. Manufactured under license from Lucasfilm Ltd. US Pat. Nos.
5,043,970; 5,189,703; and 5,222,059. Foreign patents pending. "Lucasfilm" and "THX" are registered trademarks of Lucasfilm Ltd.
Cinema Rhapsody
1
2
3
OPTICAL INPUTS
115 V
VOLTAGE SELECTOR
110/220 VAC SWITCHED
50-60 Hz, 15 WATT
(110V)
2/10A S.B.
(220V)
1/10A S.B.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
ATTENTION!
RISQUE DE CHOC ELECTRIQUE.
NE PAS OUVRIR
MADE IN U.S.A.
FUSE WARNING:
Risk of Fire! Replace Fuse
With Same Type & Rating.
WARNING! RISK OF HAZARDOUS ENERGY! MAKE PROPER CONNECTIONS.
AVERTISSEMENT! ENERGIE ELECTRIQUE DANGEREUSE! FAIRE DES CONNEXIONS
PROPRES POUR L'HAUTPARLEUR. VOIR LA NOTICE DE FONCTIONNEMENT.
CAUTION: DISCONNECT SUPPLY CORD BEFORE SERVICING.
ATTENTION: DEBRANCHER AVANT LE DEPANNAGE.
RFD-1
DIGITAL AC-3 RF DEMODULATOR
OFF
ON
DC INPUT MUTE
"DOLBY", "AC-3", AND THE DOUBLE-D
SYMBOL ARE TRADEMARKS OF DOLBY
LABORATORIES LICENSING CORP.
DIGITAL
AC-3 OUT
OUTPUT
RF
AC-3 IN
INPUT
Laser Disc without Digital Audio Output
(May have AC-3 RF Output)
Stereo
Audio Out
R
L
Video
Out
RF ¥ AC-3
Out (LD)
AC-3 RF Demodulator Output
(The Cinema Rhapsody does not have a
built-in AC-3 RF Demodulator, Use RFD-1)
AC-3 RF Cable
(Connect this cable if
laser disc has an AC-3
RF output.)
Video
Cable
Stereo AudioCable
(This cable carries standard 2 channel
analog audio from CDs & Laser Discs.)
2
2
2L
2R
4
Changing the Cinema Rhapsody’s Audio Input to Accommodate A Second Laser Disc
If you are using a laser disc player which only has either a digital coax audio output or an optical digital
audio output, you will need to use either a 75
Ω
coax to connect it to Digital Input #3 or an optical TOS-
Link type cable to connect the laser disc to Optical #3 on the Cinema Rhapsody. Then follow these
steps.
1
Turn the Input knob to LASERDISC 2 and press the knob.
2
Turn the Mode knob clockwise to SETUP MODE and press the knob.
3
Turn the Mode knob to AUDIO INPUT and press the knob. Once the knob is pressed the will
read “ANALOG IN 1”.
4
Turn the mode knob until the display reads either DIGITAL IN 2 or OPTICAL IN 2 (based on
your configuration) and press the knob.
You have now altered the LASERDISC 2 input to access either Digital Input 2 or Optical Input 2.
Connection 3
Connection 4
Connection 2
Connection 1