background image

EN • 2

ENGLISH

FRANCAIS

NEDERLANDS

ESP

AÑOL

IT

ALIANO

DEUTSCH

664Y2900.C

WARNINGS 3

Who should read these instructions 

3

Symbols 2
Applicable standards 

2

Recommendations 2
Warnings 2

DESCRIPTION 3

Packing 3
Technical characteristics 

3

Hydraulic connections 

3

Dimensions 3

INDEX

Essential instruction for the safety of persons
and the environment.

Danger of electrocution.

Essential instruction for the correct operation of
the installation.

WHO SHOULD READ THESE INSTRUCTIONS

These instructions should be read by:
- the specifying engineer
- the installer
- the user
- the service engineer

SYMBOLS

The following symbols are used in this manual:

• The product must be installed and serviced by trained

engineers, in compliance with current standards.

• Any failure to follow instructions relating to tests and test 

procedures may result in personal injury or risks of pollution.

•  To guarantee safe and correct operation of the appliance, it 

is important to have it serviced and maintained every year by 
an approved installer or maintenance company.

•  In case of anomaly, please call your service engineer.

• Despite the strict quality standards imposed by ACV during 

the manufacture, inspection and transport of its appliances, 
you might notice some errors. Please report immediately any 
fault to your approved installer.

•  The parts may only be replaced by genuine factory parts. You 

will find a list of the spare parts and their ACV reference 
number at the end of this document.

WARNINGS

This documentation is part of the information delivered with the
appliance and must be given to the user and stored in a safe
place!

An approved installer must carry out the assembly, commissioning, 
maintenance and repair of the system, in accordance with current 
standards in force.

ACV shall not accept any responsibility for damage caused by 
non-compliant location of the system or by use of the parts or 
connections not approved by ACV for this application.

  The manufacturer reserves the right to change the 

technical characteristics and specification of its
products without notice.

 

The availability of some versions and their accessories 
is market dependant..

WARNINGS

ELECTRICAL CONNECTION 

4

HeatMaster 201: serial number > at 1000 

4

HeatMaster 201: serial number < at 1000 

4

HeatMaster 200N 

6

BOOSTER KIT ASSEMBLY 

7

APPLICABLE STANDARDS

The appliances carry the 

CE

 mark in accordance with the

standards in force in the various countries (European Directives 

92/42/EC

 “Efficiency”, 

90/396/EC

 “Gas appliances”).

They also carry the “

HR Top

” label (Gas boilers).

RECOMMENDATIONS

 

• Please, carefully read this manual before installing and

commissioning the boiler.

•  It is prohibited to carry out any modifications to the inside of 

the appliance without the manufacturer’s prior and written 
agreement.

Содержание HeatMaster 200N Booster











Отзывы: