ACV E-tech P 115, Установка, эксплуатация и обслуживание

Страница: 10 / 40

10
PACKAGE CONTENTS
The E-Tech P boilers are delivered assembled and
packaged.
At product reception and after removal of
packaging, check the package contents and
that the appliance is free of damages.
• One E-Tech P boiler
• Installation, Operation and Maintenance Instruc-
tions
HANDLING INSTRUCTIONS
• The weight of this boiler is more than
100Kg, which could present a risk of
injury. Ask for help to lift it or handle it,
and use an appropriate transport/lifting
means.
• Bring the appliance as close as possible to
the installation location before removing
the packaging.
REMOVING THE BOILER FROM THE
PACKAGING
Before removing the packaging, ensure
that the installation area is clear and that
there are no obstacles, that would make the
installation difficult or unsafe.
1. Remove the packaging as well as the protection
pieces and discard in accordance with applicable
local regulations.
2. With help from another person and an appropri-
ate means of transport, bring the boiler to its lo-
cation of installation.
REMOVAL AND INSTALLATION OF THE
ACCESS PANELS
Set-up conditions
•
Boiler shut down using the ON/OFF switch
•
External power supply isolated (through the exter-
nal electrical box)
•
Boiler cooled down (if it was in operation)
Before any operation on the system, make
sure that the boiler has cooled down and that
the electrical supply is isolated.
Procedure
Right panel:
1. Release eight screws. Retain for reinstallation.
2. Remove the panel
Top panel:
1. Release two screws. Retain for reinstallation
2. Remove the panel.
Front panel:
1. Release two screws located under the control
panel. Retain for reinstallation.
2. Remove the panel.
Follow-on tasks
Perform the operation in the reverse sequence to
reinstall the panels.
x 2
x 2
x 8
EN
Installation