Acumen AiS-S32L, Инструкция по эксплуатации

Страница: 63 / 86

63/89
Figure 5 ‐ 43 video tampering Alarm
2. Check Enable video tampering checkbox to enable the video tampering
detection.
3. Set the video tampering area. Refer to Step 1 Set the Motion Detection Area in
Section 5.6.1 Configuring Motion Detection .
4. Click to edit the arming schedule for video tampering. The arming
schedule configuration is the same as the setting of the arming schedule for motion
detection. Refer to Step 2 Set the Arming Schedule for Motion Detection in Section
6.6.1 Configuring Motion Detection .
5. Check the checkbox to select the linkage method taken for the video tampering.
Notify surveillance center, send email. Please refer to Step 3 Set the Alarm Actions for Motion
Detection in Section 5.6.1 Configuring Motion Detection .
6. Click to save the settings.