13/89
1.2.2 Installation using Wall Mount Bracket
①
Make a hole whose diameter is 30~40mm on the
mounting surface to pass the wire(s) and cable(s)
through the mounting surface. (In case of the wiring
and cabling through the mounting surface only) Then
prepare the wall mount bracket. Pull the wire(s) and
cable(s) for the system as below. Attach the wall mount
bracket to the mounting surface. (Hex Lag #14
×
50)
②
Hook up “Drop Prevention Spring” on main
body to prevent camera from unexpected drop
and pull the wire(s) and cable(s) for the
system as below.
③
Line up the mold lines and assemble main body to
mount adaptor and turn it. And assemble the main
both with the camera mount adaptor with the screws.
(Torx screw M5X12). Please make sure the screws
are tightly assembled for waterproof.
④
Screw the dome cover to the main body and
remove the protection vinyl from the dome
cover.
