INSTALLATION GUIDE
8
IMPORTANT NOTE TO INSTALLER:
1. This appliance is not intended or designed to be installed in a mobile or manufactured home.
2. If this appliance is installed on carpeting, tile, or any combustible material other than wood flooring, the appli
-
ance shall be installed on a metal, concrete, or wood panel extending the full width and depth of the fireplace.
3. The appliance and its main gas valve must be disconnected from the gas supply piping system
during any
pressure testing of that system at test pressures in excess of ½ psi. (3.5 k/Pa) The appliance must be isolated
from the gas valve supply piping system by closing the equipment shutoff valve during any pressure testing of
the gas supply piping system at test pressures equal to or less than ½ psi (3.5 k/Pa)
This is a vented decorative gas appliance: not a source of heat; not for use with solid fuel.
Acucraft requires you to build an access panel within 4’ of the gas and electric stubs (the ADC100 must
also be accessible).
BL_ST_INSTL_RevB_4.08.19
