ActSafe ACX Скачать руководство пользователя страница 60

Страница: 60 / 80

Wipe the Ascender with a wet cloth
and let it dry. Do not clean the Ascender
with a high-pressure cleaner

Clean the Carabiner thoroughly, lubricate
with thin oil and wipe dry

Spray the pins with an electronic connector
cleaner/lubricator when needed

Note

DO NOT

use a high-pressure cleaner.

Repairs, annual service and inspection
shall be carried out by an ActSafe-
authorised service partner. More
frequent inspection intervals may be
required because of local regulations.

Cleaning the Ascender

G.01

MAINTENANCE & CLEANING
OF THE ASCENDER

Only use original spare parts and materials
recommended and supplied by ActSafe.

Go through ‘Checklist before use’ (F.11) during every maintenance.

RECOMMENDATION

Basic Inspection Guidance for users and
third party inspection:

To be used safely, each Ascender should meet following
requirements at all times:

» No obvious damage or excessive wear on Ascender

and its components

» Basic function test of Ascender including Emergency

Stop and emergency descent (see section F.10)

» 1,25 x SWL dynamic load test; descending full speed

and then stop with max 10 cm (3,9”) slippage

» 1,5 x SWL static load test; no slippage allowed

Содержание ACX

















































































Результаты поиска

Содержание ACX

Отзывы:

ActSafe ACX, Руководство пользователя, Страница: 60 / 80

Результаты поиска

Содержание ACX

Отзывы: