ActSafe ACX Скачать руководство пользователя страница 55 | Manualshive

Страница: 55 / 80

ActSafe ACX Скачать руководство пользователя страница 55

F.09

TRANSPORTATION

F.10

STORAGE

Carry the Ascender by the lifting handle
for short walking distances.

When carrying the Ascender any

further stow it in the transportation box
as this will protect the Ascender from
any damage. Make sure the Ascender
is secured when travelling in any vehicle.

Always clean and dry the Ascender
and the transportation box before storage.
See section G for cleaning instructions.

Always store the Ascender, Batteries

and the Remote Control dry at a temperature
between 5°C (41°F) and 25°C (77°F). For
more detailed Battery storage information,
see section E.09.

CAUTION

Always store the Battery fully charged.

The Battery can stay connected to ACX
during transport or short term storage
(1 week). For longer storage, store
the Battery disconnected and perform
a maintenance charge every 3 months.

Note

The Ascender Batteries hold over
100 Wh of power and are therefore
fully regulated as Dangerous
Goods (

Class 9 UN3480

Lithium

Ion Batteries) and must be handled
and shipped accordingly. Contact
your ActSafe distributor or ActSafe
directly for further details.

55

«
...
53
54
55
56
57
...
»

Содержание ACX

















































































Отзывы:

Нет отзывов