ActSafe ACX Скачать руководство пользователя страница 11

Страница: 11 / 80

For any purpose other than that
for which it has been designed

In an explosive environment

If modi

ed in any way by anyone

other than ActSafe

After a free fall from a height of
more than 0.5 m (2 ft) or any other
severe impact onto a hard surface

If subjected to misuse in any
way so that parts or components
might have been damaged

The Ascender system should not
be exposed to high impact forces
caused by people or loads falling
into the system

With any Battery other than
original ActSafe ACX Batteries

With any other battery charger
than an original ActSafe ACX
Battery Charger

With a damaged or modi

ed ActSafe

ACX Battery and/or ACX Charger

If the operator is unsure of how
to use the Ascender safely

If you are tired, ill, using prescription
medication that prevents you from
using machinery, or under the
in

uence of alcohol and/or drugs

Without having performed
a pre-use check

B.02

THE ASCENDER

MUST NOT BE USED:

Содержание ACX

















































































Результаты поиска

Содержание ACX

Отзывы:

ActSafe ACX, Руководство пользователя, Страница: 11 / 80

Результаты поиска

Содержание ACX

Отзывы: