INTRODUCTION
INTRODUCTION
Thank you for selecting the Actiiv blood pressure Monitor
(ACMMD001 .) The
monitor features blood pressure measurement, pulse rate measurement and
storage of results.
Readings taken by the device are equivalent to those obtained by a trained
observer using the cuff and stethoscope auscultation method.
step instructions for using the product.
This manual contains important safety and care information, and provides step by
Please read this user manual carefully and thoroughly before use.
FEATURES:
Systolic Blood Pressure
Diastolic Blood Pressure
Pulse Rate
Memory: Up to 60 readings can be
recorded
This product uses the Oscillometric Measuring Method to detect blood pressure.
Before every measurement, the unit establishes a “zero point” equivalent to the
atmospheric pressure. Then it starts inflating the cuff. Meanwhile, the unit detects
pressure oscillation generated by beat-to-beat pulsatile, which is used to deter-
mine the systolic pressure and diastolic pressure as well as pulse rate.
The device also compares the longest and the shortest intervals of detected
pulse wave with the average value, and then calculates the standard deviation.
The monitor will light up a warning symbol when the calculated standard deviation
is larger than or equal to 15.
Measurement Principle
General Description
The below signs might appear in the user manual, labeling or other components.
Safety information
2
3
Indications for use
The Actiiv Blood Pressure Monitor is a digital monitor intended for use in
measuring blood pressure and heartbeat rate with a wrist circumference ranging
from 13.5 cm to 21.5 cm ( about 5-8.5 inches ).
It is intended for adult indoor use only.
CAUTION
* It is intended for adult indoor use only. Pregnant women, pre-eclamptic patients
and patients with severe obesity should not use this device. If required, please consult a
professional doctor.
* This device is intended for non-invasive measuring and monitoring of arterial blood pressure. It is
not intended for use on extremities other than the wrist or for functions other than obtaining a
blood pressure measurement.
* Please use the device under the specified environment as instructed in this user manual,
otherwise the accuracy of the device will be influenced.
* Do not confuse self-monitoring with self-diagnosis. This unit allows you to monitor your blood
pressure. Please only start or end any medical treatments based solely on a physician's treatment
advice.
* If you are taking medication, consult your physician to determine the most appropriate time for
your measurement. Never change a prescribed medication without your physician’s consent.
* This unit is not suitable for continuous monitoring during medical emergencies or operations.
After the cuff has been inflated for a long time, the patient’s wrist and fingers blood supply will
become insufficient and could result in distending pain and ecchymosis.
* If the pressure of the cuff exceeds 40 kPa (300 mmHg), the unit will automatically deflate. If the
cuff doesn’t deflate when its pressure exceeds 40 kPa (300 mmHg), detach the cuff from the wrist
and press the START/STOP button to stop inflation.
* Do not use the monitor under strong electromagnetic field conditions (e.g. medical RF equipment)
that radiate an interference signal or electrial fast transient/ burst signal.
* The maximum temperature that the applied part can achieve is 42.5 ℃ while the
environmental temperature is 40℃.
* The device is not AP/APG equipment. It is not suitable for use in the presence of a flammable
anesthetic mixture with air (or oxygen, nitrous oxide).
* Please keep the unit out of reach of infants, children or pets, since inhalation or swallowing of
small parts is dangerous or even fatal.
* Please use the accessories and detachable parts as specified and authorised by the manufacturer.
Otherwise, it may cause damage to the unit or danger to the user / patient.
* The patient is an intended operator. The patient can measure, transmit data and charge the battery
under normal circumstances and maintain the device and its accessories according to the user
manual.
* The blood pressure monitor, its adaptor, and the cuff are suitable for use within the patient
environment. If you are allergic to dacron or plastic, please don’t use this device.
*This device cannot be used with HF surgical equipment at the same time.
* There is a PTC current limiter in the monitor, with a specification of 8V and 0.5A. When the voltage
and current exceed the limiting value, the monitor will stop working.
* The device is not suitable for public use.
T1A/250V Φ3.6*10CCC
F1
For indoor use only
Symbol for “TYPE BF
APPLIED PARTS”
Symbol for “DIRECT
CURRENT”
The Bluetooth Combination
Mark
Symbol for “THE OPERATION
GUIDE MUST BE READ”
