background image

MEASUREMENT

DATA MANAGEMENT

12

START

STOP

4. Press STOP button to turn off 

the monitor.

2.The device will proceed to transmit 

data after taking the measurement.

   The Bluetooth symbol 

blinks on the LCD 

to indicate data is transmitting to your phone.

3. If the data is successfully 

transmitted, the LCD will then 

display “dONE”.

   If the data transmission fails, the 

LCD will display “     ” instead. 

CAUTION

   

   

 

 

1. When using this device, please pay attention to the following situations which may 

interrupt blood flow and influence blood circulation of the patient, thus causing harm or

injury to the patient: too frequent and consecutive multiple measurements; 

the application of the CUFF and it’s pressurization on any wrist where intravascular

access or therapy, or an arterio-venous (A-V) shunt, is present;

Inflating the cuff on the wrist on the side of a mastectomy.

2. Do not apply the cuff over a wound, otherwise it can cause further injury.

3. Do not inflate the cuff on the same limb which other monitoring ME EQUIPMENT

is applied simultaneously, because this could cause temporary loss of function

of those simultaneously-used monitoring ME EQUIPMENT.

4. Do not use the device in such a way as to cause prolonged impairment of blood 

circulation in the patient.

13

Recall the Records

1.Press the “MEM” button to access the 

memory. The monitor will display the 

calculated average of the last three 

readings first.

2.  Press “MEM/UP” button or 

“SET/DOWN” button to rotate the 

history records.

   “MEM/UP” to go forward;

   “SET/DOWN” to go backward.

The most recent record (1)  is shown first.  Each new measurement 

is assigned to the first (1)  record. All other records are pushed back 

one digit (e.g., 2 becomes 3, and so on), and the last record (60)  is 

dropped from the list.

CAUTION

CAUTION

5. The cuff pressure may continuously increase which can prevent blood 

flow and result in harmful injury to the PATIENT. Sensitive people, 

including pregnant women, pre-eclamptic patients, patients with 

implanted medical electronic instruments and have atrial fibrillation (AF), 

premature ventricular beats and peripheral arterial disease (PAD), should 

avoid using the unit whenever possible.

Содержание ACMMD001















Отзывы: