BEFORE YOU START
BEFORE YOU START
6
1. The battery for ACMMD001 is a built-in rechargeable
lithium-ion battery, with a current of 420 mAh.
2. Please use the USB cable provided to charge the battery
just like the picture below:
Power Supply and Charge Power
Your device will require charging under the following circumstances:
displays on the LCD
The LCD display dims
When powering on the monitor, the LCD doesn’t light up.
CAUTION
1. The battery used is a built-in rechargeable lithium-ion battery,
please do not disassemble it by an unauthorized maintenance personel.
2. Under normal use, it can be charged about 300 times.
If measured three times per day, and the battery
is fully charged, it can be used for about 20 days.
3. Store and use the blood pressure monitor in a cool, dry and
ventilated environment. Avoid close proximity to fire and heat sources or it
may cause the battery explode.
4. You cannot use the blood pressure monitor during the charging process.
5. During the process of charging, the blood pressure monitor will
display this symbol:
When charging is complete, please remove plug before use.
6. When charging, do not touch the charging connector and the patient
simultaneously.
7
Setting Date and Time
2
.As pictured in the right, the
blinking number “12” representing
[HOUR]. Press “MEM” button to
change the number. Each press
will increase the number by one
in a cycling manner.
1.When the monitor is OFF, press
and hold the “SET” button for 3
seconds to enter Time Setting
Mode.
3
.Press “SET” button again to
confirm [HOUR]. Then the
number representing [MINUTE]
blinks.
Please proceed to set the time before your initial use to
ensure each record is labelled with a time stamp. (Year
Range: 2012-2052; Time Format: 12 Hours)
