Actidata actiNAS cube RDX, Руководство пользователя

Страница: 117 / 168

117
System · / actiNAS Manager
Before configuring the DHCP service, make sure the network devices eth0 and eth1 are already assigned
the proper IP address in Network

Device Configuration.
To use the NAS as a DHCP server / Internet Gateway:
1. Select the DHCP service in
System

Service
2. Click Edit ,configure the following:
IP range starting from Means the starting address of range of private IP addresses for DHCP
IP range ending with Means the ending address of range of private IP addresses for DHCP
Private Net The network device connected to the private network. For example: eth1
WAN The network device connected to the Internet / WAN. For example: eth0
NOTE: In this example, eth1 is assigned to Private Net and must have an IP in the same subnet, for example: as
192.168.20.2
3. Click OK to save.