ACTi A713 Скачать руководство пользователя

Страница: 92 / 115

2.4.4

IR Function

The IR Function setting can be found under this path:

Camera> IR Function

NOTE:

This function is

ONLY

available for models with IR function.

Day/Night Function

This item is for users to define the action of the IR cut filter and IR LED lights.

Refer to the descriptions of each option below to select a suitable mode.

⚫

Auto Mode

With this mode, the camera can decide the occasion to remove the IR

cut filter. Please refer to

IR Function: Day/Night Threshold

for further

details.

⚫

Night Mode

Use this mode when the environment light level is low. The IR cut filter

will be removed to allow the camera to deliver clear images in black and

white.

⚫

Day Mode

Select this mode to turn on the IR cut filter. The IR cut filter can filter out

the IR light and allows the camera to deliver high quality images in color.

⚫

Smart Mode

With Smart mode, the camera will decide the occasion to remove the IR

cut filter. The Smart mode mechanism can judge whether the main light

source is from IR illumination. If so, the IR cut filter will be kept removed

(i.e. monochrome/night mode).

NOTE:

It is recommended to select

“Smart Mode” when the

camera sets high zoom ratio for close-up view.

⚫

Light Sensor Mode (Default)

In this mode, for cameras with built-in IR LED modules, the light sensor

will decide the occasion to turn the IR LED lights on / off. For cameras

with non-IR modules, the light sensor will decide the occasion to take

the IR cut filter on / off.

Содержание A713




















































































































Результаты поиска

Содержание A713

Отзывы:

Похожие инструкции для A713

Бренды по названию

Популярные бренды

ACTi A713, Руководство по прошивке

Результаты поиска

Содержание A713

Отзывы:

Похожие инструкции для A713

Бренды по названию

Популярные бренды