ACTi A713 Скачать руководство пользователя

Страница: 110 / 115

109

2.6.6

Tilt Range

The Tilt Range setting can be found under this path:

PTZ> Tilt Range

The camera

’s tilt angle is adjustable from minimum −20° to maximum +100°.

Please enter the desired minimum and maximum tilt angle into the

corresponding fields respectively. Click the <Set> button to save the tilt angle

settings.

2.6.7

Privacy Mask

The Privacy Mask can be found under this path:

PTZ> Privacy Mask

The Privacy Mask function aims to avoid any intrusive monitoring. When setting

a mask, it is suggested to set it at least twice bigger (height and width) than the

masked object. The camera will assume the center of the selected view as the

starting point. Therefore, please keep the target object / region nearly

positioned in the center of the scene.

Mask Setting

⚫

Switch

Select <On> or <Off> to activate or disable the Privacy Mask function.

Click the <Set> button to apply the setting.

⚫

Color

Select a color from the <Color> drop-down list for the specified Privacy

Mask. Click the <Set> button to apply the setting.

⚫

Mask Number (1~20)

Specify the number of the programmed Privacy Mask in the entry field.

⚫

Zoom Factor

Normally, a privacy mask goes repositioned and resized to cover the

masked area whenever the camera is panned/tilted/zoomed. Zoom

Factor allows users to hide the mask when zoom ratio is set lower than

the original ratio.

For example, when the privacy mask is set at a certain zoom ratio (e.g.

5x), the privacy mask will be resized when the camera is zoomed in (e.g.

from 5x to 20x); however, when the camera zooms out (e.g. from 5x to

2x), the privacy mask will be hidden.

Select <On> or <Off> to activate or disable the Zoom Factor function.

Содержание A713




















































































































Результаты поиска

Содержание A713

Отзывы:

Похожие инструкции для A713

Бренды по названию

Популярные бренды

ACTi A713, Руководство по прошивке

Результаты поиска

Содержание A713

Отзывы:

Похожие инструкции для A713

Бренды по названию

Популярные бренды