ACTi A713 Скачать руководство пользователя страница 34

Страница: 34 / 115

2.2.8

Events (Alarm Settings)

The Events setting can be found under this path:

System> Events

Click on <Events>, there will be a drop-down menu with tabs including

<Application>, <Motion Detection>, <Network Failure Detection>, <Tampering>,

<Periodical Event>, <Manual Trigger>, and <Audio Detection>.

2.2.8.1

Application

The Application setting can be found under this path:

System> Events>

Application

The camera supports one alarm input and one relay output for cooperation with

alarm system to catch event images. Refer to alarm pin definition below to

connect alarm devices to the camera if needed.

Alarm Switch

The default setting for the Alarm Switch function is <Off>. Enable the function by

selecting <On>. Users can also activate the function according to the schedule

previously set in the <Schedule> setting page. Select <By schedule> and click
<Please select…> to choose the desired schedule from the drop-down menu.

Alarm Type

Select an alarm type, <Normal close> or <Normal open>, that corresponds with

the alarm application.

Triggered Action

The administrator can specify alarm actions that will take when the alarm is

triggered. All options are listed as follows.

⚫

Enable Alarm Output (high/low)

Select the item to enable alarm relay output.

⚫

IR Cut Filter

Select the item and the IR cut filter (ICR) of the camera will be removed

(on) or blocked (off) when alarm input is triggered. This function is only

available for models with IR cut filter.

NOTE:

The IR Function (refer to section

IR Function

) could not

be set as <Auto> mode if this triggered action is enabled.

Содержание A713




















































































































Результаты поиска

Содержание A713

Отзывы:

Бренды по названию

Популярные бренды

ACTi A713, Руководство по прошивке

Результаты поиска

Содержание A713

Отзывы:

Бренды по названию

Популярные бренды