ACTi A1D-220-V3.14.19-AC, Руководство пользователя

Страница: 60 / 69

60
optimized for day and night, this provide better overall accuracy in both day
and night conditions. Some night time only MD regions may also be
activated this way. The event period will end when the camera returns to day
mode, which will then reset the camera to the original settings.
Ready: This will trigger the event responses once the device boots up.
You can use this to create a notification system that keeps record of when the
device has been rebooted via email.
Stop: This triggers the event response when the device is shut down
via web UI “Save and Reboot”. Use this to keep record of when was the
device setting edited. Note that this will not take effect when the device is
unplugged, as this is not normal shutdown.
What responses will occur?
Digital Output (selected models only): This is an useful link to other
devices. Click to include this in the response for this rule.
Send notification Message: Select from the three pre-defined
messages which you’ve setup in the Event Configuration section. You may
enable multiple messages at the same time. For sending Email, please limit
the recipient to one per event rule. If you need to send email to more than one
recipient, please use separate event rules triggered by the same trigger.
Upload video/snapshots: Select which of the event configurations to
include in this response set. If you are sending email via upload video and
sending notification message at the same time, the system will automatically
merge the two emails into one. The subject and image will be based upon the
Upload snapshot Event configuration enabled, but the message in the body
text will be based upon the Notification messages.
In general, please stick to the “one email per event rule” limit for best
performance.