ACTi A1D-220-V3.14.19-AC, Руководство пользователя

Страница: 4 / 69

4
1.2 Preparation before setup
Our IP device provides access through Internet Explorer. You need to
set up the network settings and the IP address for the IP device. Please make
sure all connections are properly connected, then follow the procedures
below.
1. Setup your PC network
The IP address for your PC must be within the same subnet as the IP
device. You need to match the TCP/IP settings between PC and IP device
before you can access it via IE.
2. Setup IP device’s IP address
This IP device’s IP address can be assigned manually or acquired
automatically by network service (DHCP). If it acquires the IP address by
using the DHCP service, please use the IP utility software bundled in the
product CD to find the IP address for all IP devices.
1.2.1 Setup your PC network
To set up the network of IP device via a PC, you have to change the
TCP/IP settings of the PC.
The following are the default network settings of IP device.
IP Address: 192.168.0.100
Subnet Mask: 255.255.255.0
To access the IP device, the IP address of the PC should match the
address below.
IP Address: 192.168.0.xxx
Subnet Mask: 255.255.255.0