ACTi A1D-220-V3.14.19-AC, Руководство пользователя

Страница: 31 / 69

31
To the right of Video window is the Motion Activity window. The
vertical blue bars show recent amount of activity detected in the selected
motion region. The red line shows the trigger threshold for the Runtime
MD profile, and the blue line shows the threshold for the Event MD
profile. If the activity is above the threshold currently used, an motion event
will be triggered. This means that if this MD region is currently using Event
MD profile, a motion will be trigger when activity climbs above the blue line,
not the red line. For detail settings, please see “ Motion Detection Explained”
at the end of this section.
Motion detection: You can set motion detection for up to three
regions that can overlap with each other. Each region has three parameters:
sensitivity, trigger interval and threshold.
For parameters in each region, you may always use the same values, or
you may switch between Runtime Profile and Event Profile via our Event
handler. Please see sidebar for how to setup the proper values, and Events
section (Page 32) on how to use Dual Motion Detection profile sets.
Follow these steps to setup Motion Detecion:

STEP 1 : Check this
b
ox to enter Motion Setup mode. After you
click on Motion Setup, the text on button will change to Apply, and
greyed out info will now be editable.

STEP 2: Check this box to enable Motion Detection

STEP 3: Make sure you are editing the correct set of profile via the
drop down list (Choose Runtime MD Profile unless you are using
alternative profiles through Event handler)

STEP 4 : Enable individual Motion Detection Region to show the