ACTi A1D-220-V3.14.19-AC, Руководство пользователя

Страница: 37 / 69

37
changes.
Night to Day
Threshold
This value controls the level of light where camera
switches into Day mode. Increasing it will make camera
switch to Day mode at a darker illumination level.
Night To Day
Timer
The camera will only switch day/night status if the
illumination level stays either above or below the boundary
for this much time. This is to prevent a temporary
brightness change from triggering unnecessary day/night
changes.
Current Exposure
Level
Clicking this button will refresh the illumination level
reading from the camera sensor. The larger the number,
the darker the environment.
IR LED Control
IR LED may be configured as AUTO or Disabled here. If it
is set as AUTO, LED will turn on in night mode and turn off
in day mode. If set to Disabled, LED will stay off when
camera switches into night mode.
STEP2 : Click the [Apply] button of each section to confirm the
settings or click the [Reset] button to re - enter the parameters.
NOTE: This section is available for ACM-5811 / ACM-7511 only.
Other CCD Models may not have Camera Setup section.