background image

50

44

8

At that moment, flashing of the 
display will change to the right-side 
numbers, which control "red" 
printing for OUT punch before the 
end time.  If you want to print any 
OUT punch before the end time in 
red, push the [+] or [-] button to set 
at "1" and push the [SET] button.

9

Push the [SETTING START/END] 
button to get out of setting mode.
Make sure "date" and "time" are 
indicated on the display and the 
colon is flashing.  Then replace the 
cover and lock.

Set the " 08  Red printing for grace time period".

7

Again, push the [SET] button to set 
the left-side number at "08" by 
pressing the [+] button. At that 
moment, flashing of the display will 
change to the middle numbers 
which control "red" printing for IN 
punch after the start time.  If you 
want to print any IN punch after the 
start time in red, push the [+] or [-] 
button to set at "1" and push the 
[SET] button.      

Note: All punches during break time 
will be printed in black regardless of 
above setting.

SET

FUNCTION

Program No.

SCHEDULE

SET

FUNCTION

SCHEDULE

SET

FUNCTION

SCHEDULE

SET

FUNCTION

SCHEDULE

Option Action

Red printing for any punch 
during the grace time for 
irregular recognition. 

Any punch during grace 
time period will be printed 
in black.

1

--

For OUT Punch

For OUT Punch

AM

Colon

Date

For IN Punch

Содержание ES1000













































































Отзывы: