安科瑞电气股份有限公司
20
开入状态界面显示该回路为
1
；输入接点断开，开入状态界面显示该回路为
0
。
The device provides 4 digital input, they can connect to the auxiliary contact of breaker. The device is
worked after power on. If the digital input contact is closed, the DI is
“
1
”
on the DI Status interface. When
the digital input contact is open, the DI is
“
0
”
on the DI Status interface.
2.2.3
继电器输出
2.2.3 Relay Output
自动定值越限继电器输出包括：无线温度传感器组
1
高温、无线温度传感器组
1
超温、无线温
度传感器组
2
高温、无线温度传感器组
2
超温、无线温度传感器组
3
高温、无线温度传感器组
3
超
温、无线温度传感器组
4
高温、无线温度传感器组
4
超温、无线温度传感器组
5
高温、无线温度传
感器组
5
超温、无线温度传感器组
6
高温、无线温度传感器组
6
超温。高温预警为第一路继电器输
出，超温告警为第二路继电器输出。
Relay output include: sensor group 1 high temperature, sensor group 1 over temperature, sensor
group 2 high temperature, sensor group 2 over temperature, sensor group 3 high temperature, sensor
group 3 over temperature, sensor group 4 high temperature, sensor group 4 over temperature, sensor
group 5 high temperature, sensor group 5 over temperature, sensor group 6 high temperature, sensor
group 6 over temperature. The high temperature alarm is first relay output, the over temperature alarm
is second relay output.
注意：需将相应的控制字选择为“投入”才有效！
Notice: it is valid only when the “Node Enable”
of sensor group
is “ON”!
2.2.4
无线测温
2.2.4 Wireless Temperature Measuring
装置通过无线温度收发器和各无线温度传感器直接进行温度值的传输，并采用液晶显示各无线
温度传感器所测温度。通过菜单可设置无线温度传感器组的高温预警值、超温告警值，当测得温度
值超出设定值时，装置继电器输出触点闭合。
The device transmits the temperature values directly via the wireless temperature coordinator and
wireless temperature sensors and shows temperature values measured on the LCD screen by wireless
temperature sensors. Set the high temperature values and over temperature values of wireless
temperature sensor groups. When measured temperature values exceed the setting values, the relay
output contact will be closed.
2.2.5
电力参数测量
2.2.5 Electric power parameter measurement
装置可以测量主回路的电流、电压、有功功率、功率因数、电能等电力参数，可在装置“电量”
菜单中查看，通过左
/
右键切换显示内容，无功功率、视在功率等可以通过通讯口读出。
Device can measure the current, voltage, active power, power factor, electric energy and other
electric parameters of main circuit and check in the
“
electric quantity
”
menu of device. By left/right key
