29
E N
28
E N
CAUTIOn
To avoid overheating, do not cover the heating appliance.
nOTe
It is important to keep the blower air inlet and outlet clear.
ImPOrTAnT
The blower on your towel radiator is fitted with a filter detector.
If the filter is missing or positioned incorrectly, the blower cannot function (see
chapter 3.2.2).
1.4 Overview of the remote control
1.5 Starting the radiator, the blower and the remote
control
Turn on the radiator and the remote control by pressing and holding the respec-
tive ON/OFF switches. Turn on the blower by pressing its ON/OFF switch.
The towel radiator and the blower, where present, are now ready to receive
instructions from the remote control (see chapter 3.1).
2. Installing your towel radiator and its
remote control
2.1 Choosing the position of your towel radiator
To get the most out of your appliance and enjoy the highest standards of comfort,
we recommend that you:
- install the appliance near places of high heat loss (windows, doors, etc., see
figure
①
) wherever possible,
- ensure that an area of at least 50 cm in front of the appliance is clear of objects
which might hinder air circulation (furniture, chairs, etc.)
- ensure that the bottom of the appliance is positioned at least 15 cm above the
floor, see figure
①
,
- leave at least 10 cm between the top of the appliance and any shelf,
- use mounting screws suitable for your wall,
- do not expose the radiator to intense or prolonged humidity.
ImPOrTAnT
The heating appliance must not be placed underneath a power
outlet.
ImPOrTAnT
This radiator must never be installed with its blower at the top, see
figure
②
.
Blower operating
P1 and/or P2 displayed:
programme(s) activated
Infra-red signal
transmission
Manual blower
activation
Activation/Adjustment of
daily programme P2
On / Off
Activation/Adjustment of
daily programme P1
Set time
Low battery
indicator symbol
P1 and/or P2 dis
frame: programme(s)
in progress
Settings display (time,
temperature, boost time)
①
②