35
E N
34
E N
3.6 electronic lock
This function prevents unwanted operation of the control panel.
When it is activated, unintentional mode or desired temperature level
changes are not possible.
To activate this function, press the
-
and
+
keys together for 5 seconds then
release when the lock indicator appears.
If any of the keys are touched again, this indicator will blink twice to inform you
that the lock is active.
To deactivate this function, press the
-
and
+
keys together for 5 seconds. The
control panel is now unlocked and the lock indicator disappears.
nOTe:
Mode changes made by a pilot wire or PLC base unit (not supplied with your
appliance) will not be deactivated by this function.
A reset to factory settings is also possible when the lock is active.
3.7 reset to factory settings
ImPOrTAnT
You can return to the factory settings at any time (even if the lock
is active) by holding the
RESET
key using a small round-tipped tool which cannot soil
or scratch your control panel.
Your display will successively show "--" then "88 8" before returning to its original
parameters (see chapter 3.1).
3.4 Override
In your radiator's programmed operating modes (P1, P2 and P3, or AUTO mode
operated by an external base unit), you can locally override the operation of your
radiator by modifying the desired temperature level.
The override will end the next time the operating mode changes at the radiator's
or programming base unit’s request.
3.5 Stopping the heating
Press and hold the key to stop the heating of your appliance.
If programme P1, P2
or P3 in progress
If AUTO mode
in progress
1st time
-
or
+
pressed
● Modifies the
desired temperature.
● Symbol shown,
indicating override.
● Instruction sent by
the base unit displayed.
● If it blinks, the
instruction from the
base unit cannot be
overridden (no step 2).
2nd time
-
or
+
pressed
● Modifies the
desired temperature.
● Symbol shown,
indicating override.
THe rADIATOr DOeS nOT HeAT.
