background image

OR

Standard Configuration

Alternate Configuration

A172.8UBL Series

Refrigerated Universal Bi-Level 

Barrier Free, Wall Mounted Water Cooler

 

A172108F-UBL / A172408F-UBL / A172108F-SO / A172408F-SO

1.800.591.9360

Technical Assistance Fax: 1.626.855.4894

TECHNICAL ASSISTANCE TOLL FREE TELEPHONE NUMBER: 

 

 

 

 

 

7020-905-001

     

Date: 08/11/14

NOTES TO INSTALLER:

1. Please leave this documentation with the owner of the fixture when finished. 
2. Please read this entire booklet before beginning the installation. 
3. Check your installation for compliance with plumbing, electrical and other applicable codes.

LIMITED WARRANTY - UNITED STATES & CANADA

Acorn Engineering warrants Water Coolers, Drinking Fountains and remote Chillers are free from defects in 
material or workmanship under normal use and service for a period of one year from date of shipment from the 
factory. The compressor, condenser and refrigeration tubing is warranted for an additional four years after the 
period described above. Acorn’s liability under this warranty shall be discharged solely by repair or replacement 
of defective material, provided Acorn is notified in writing within the time periods described above. 

This warranty does not cover installation or labor charges and does not apply to materials, which have been 
damaged by other causes such as mishandling or improper care or abnormal use. The repair or replacement of 
the defective materials shall constitute the sole remedy of the Buyer and the sole remedy of Acorn under this 
warranty. Acorn shall not be liable under any circumstances for incidental, consequential or direct charges 
caused by defects in the materials, or any delay in the repair or replacement thereof.  This warranty is in lieu of 
all other warranties expressed or implied. Product maintenance instructions are issued with each unit and 
disregard or non-compliance with these instructions will constitute an abnormal use condition and void the 
warranty. Stainless steel must be protected on jobsite during construction and must be properly maintained 
after the water has been introduced into the water cooler or drinking fountain, or Acorn’s limited warranty is 
void.

LIMITED EXPORT WARRANTY - One year on parts only. 

COMPLIES 

WITH

Acorn Engineering Company™ assumes no 
responsibility for use of void or superseded data. 
© Copyright Acorn Engineering, City of Industry,
CA  Member of  Morris Group International.
Please visit 

 

for most current specifications.

www.acorndrinkingfountains.com

Test rating conditions are
compliant with ARI 1010.

Federal
Public Law
111-380 
(No Lead)

Member of

ACORN

Water Coolers &

Drinking Fountains 

15125 Proctor Ave.

City of Industry, CA

91746 U.S.A.

Phone 800-591-9360

626-336-4561

w w w. a c o r n d r i n k i n g f o u n t a i n s . c o m

 

 

INSTALLATION, OPERATIONS 

& MAINTENANCE MANUAL

Содержание A172.8UBL Series












Отзывы: