Acnodes RMC 7150 Скачать руководство пользователя

Страница: 57 / 66

14628 Central Blvd,

Chino, CA91710

tel:909.597.7588, fax:909.597.1939

are subject to change without notice. For latest product information,

please visit Acnodes’ web site at www.acnodes.com.

RMC 7150

14” short depth rack server

System Temperature: The system temperature will be displayed (in degrees in Celsius and Fahrenheit) as it is detected by the

BIOS.

Fan Speed Readings

This feature displays the fan speed readings from Fan1 through Fan8.

Fan Speed Control Modes

This feature allows the user to decide how the system controls the speeds of the onboard fans. The CPU temperature and the

fan speed are correlative. When the CPU on-die temperature increases, the fan speed will also increase, and vice versa. Select

Workstation if your system is used as a Workstation. Select Server if your system is used as a Server. Select Disabled to

disable the fan speed control function and allow the onboard fans to constantly run at full speed. The Options are:

Disabled, 4-pin (Server), 4-pin (Workstation), 4-pin (Quiet), 4-pin (Super Quiet).

Voltage Readings

The following voltage readings will be displayed.

CPU0 Vcore, CPU1 Vcore, 1.5V, 5V, 5VSB, 12V, -12V, 3.3Vcc, 3.3VSB, VBAT and Vtt

XACPI Configuration

Use this feature to configure Advanced Configuration and Power Interface (ACPI) power management settings for your system.

High Performance Event Timer

Select Enabled to activate the High Performance Event Timer (HPET) that produces periodic interrupts at a much higher

frequency than a Real-time Clock (RTC) does in synchronizing multimedia streams, providing smooth playback and reducing

the de- pendency on other timestamp calculation devices, such as an x86 RDTSC Instruc- tion embedded in the CPU. The

High Performance Event Timer is used to replace the 8254 Programmable Interval Timer. The options are Enabled and Disabled.

USB Device Wakeup

Select Enable to "wake-up" the system via a USB device when the system is in S3 or S4 State. The options are Enabled and

Disabled.

PS2 KB/MS Wake Up

Select Enable to "wake-up" the system using either the PS2 keyboard or mouse (if equipped) when the system is in S3 (Sleep)

or S4 (Hibernate) state. The options are Enabled and Disabled.

ACPI Aware O/S

Enable ACPI support if it is supported by the OS to control ACPI through the Operat- ing System. Otherwise, disable this

feature. The options are Yes and No.

ACPI APIC Support

Select Enabled to include the ACPI APIC Table Pointer in the RSDT (Root System Description Table) pointer list. The options

are Enabled and Disabled.

APIC ACPI SCI IRQ

When this item is set to Enabled, APIC ACPI SCI IRQ is supported by the system. The options are Enabled and Disabled.

Содержание RMC 7150



































































Результаты поиска

Содержание RMC 7150

Отзывы:

Похожие инструкции для RMC 7150

Бренды по названию

Популярные бренды

Acnodes RMC 7150, Руководство пользователя

Результаты поиска

Содержание RMC 7150

Отзывы:

Похожие инструкции для RMC 7150

Бренды по названию

Популярные бренды