14628 Central Blvd,
Chino, CA91710
tel:909.597.7588, fax:909.597.1939
© Copyright 2011 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at www.acnodes.com.
RMC 7150
14” short depth rack server
17
CHAPTER 4 SYSTEM SAFETY
4.1 Electrical Safety Precautions
Basic electrical safety precautions should be followed to protect yourself from harm and the RMC 7150 damage:
- Be aware of the locations of the power on/off switch on the chassis as well as the room’s emergency power on/off
switch, disconnection switch or electrical outlet. If an electrical accident occurs, you can then quickly remove power from the
system.
- Do not work alone when working with high voltage components.
- Power should always be disconnected from the system when removing or installing main system components,
such as the serverboard, memory modules and floppy drive. When disconnecting power, you should first power down the
system with the operating system first and then unplug the power cords of all the power supply units in the system.
- AWhen working around exposed electrical circuits, another person who is familiar with the power-off controls should
be neaerby to switch off the power if necessary.
- Use only one hand when working with powered-on electrical equipment. This is to avoid making a complete circuit,
which will cause electrical shock. use extreme caution when using metal tools, which can easily damage any electrical
components or circuit boards they come into contact with.
- Do not use mats designed to decrease static electrical discharge as protection from electrical shock. Instead, use
rubber mats that have been specifically designed as electrical insulators.
- The power supply power cords must include a grounding plug and must be plugged into grounded electrical outlets.
- This product may be connected to an IT power system. In all cases, make sure that the unit is also relably con-
nected to Earth.
- Serverboard Battery: CAUTION - There is a danger of explosion if the onboard battery is installed upside down,
which will reverse its polarities. This battery must be replaced only with the same or an equivalent type recommended by the
manufacturer. Dispose of used batteries according to the manufacturer’s instructions.
- DVD-ROM Laser: CAUTION - This server may have come equipped with a DVD-ROM drive. To prevent direct
exposure to the laser beam and haardous radiation exposure, do not open the enclosure or use the unit in any unconven-
tional way.
- Mainboard replaceable soldered-in fuses: Self-resetting PTC (Positive Temperature Coefficient) fuses on the
mainboard must be replaced by trained service technicians only. The new fuse must be the same or equicalent service
technicians only. The new fuse must be the same or equivalend as the one replaced. Contact technical support for details
and support.
4.2 General Safety Precautions
Follow these rules to ensure general safety:
- Keep the area around the RMC 7150 and free of clutter.
- The RMC 7150 weighs approximately 18 lbs. when fullyloaded. When lifting the system, two people at either end
should lift slowly with their feet spread out to distribute the weight. Always keep your back straight and lift with your legs.
- Place the chassis top cover and any system components that have been removed away from the system or on a
table so that they won’t accidentally be stepped on.
- Remove any jewelry or metal objects from your body, which are excellent metal conductors that can create short
circuits and harm you if they come into contact with printed circuit boards or areas where power is present.
- After accessing the inside of the system, close the system back up and secure it to the rack unit with the retention
screws after ensuring that all connections have been made.
