Acnodes RMC 7150 Скачать руководство пользователя

Страница: 31 / 66

14628 Central Blvd,

Chino, CA91710

tel:909.597.7588, fax:909.597.1939

are subject to change without notice. For latest product information,

please visit Acnodes’ web site at www.acnodes.com.

RMC 7150

14” short depth rack server

Power Fail LED

The Power Fail LED Connection is located on

pins 5 and 6. Refer to the table on the right for

pin definitions.

Overheat LED (OH)

Conneect an LED to the OH connection on pins

7 and 8 of JF1 to provide advanced warning of

chassis overheating. Refer to the table on the right

for pin definitions.

NIC2 (LAN2) LED

The LED Connections for LAN2 are on pins 9 and

10 of JF1. Attatch LAN LED cables to display

network activity. See the table on the right for pin

definitions.

NIC1 (LAN1) LED

The LED connections for LAN1 are on pins 11 and

12 of JF1. Attatch LAN LED cables to display network

activity. See the table on the right for pin definitions.

HDD LED

The HDD LED connection is located on pins 13 and

14 of JF1. Attatch the hard drive LED cable here to

display disk activity (for any hard drives on the system.

Including the Serial ATA and IDE). See the table on the

right for pin definitions.

Содержание RMC 7150



































































Результаты поиска

Содержание RMC 7150

Отзывы:

Похожие инструкции для RMC 7150

Бренды по названию

Популярные бренды

Acnodes RMC 7150, Руководство пользователя

Результаты поиска

Содержание RMC 7150

Отзывы:

Похожие инструкции для RMC 7150

Бренды по названию

Популярные бренды