8.
Mounting the propellers
Required parts:
- 1x female screws and 1x screws (already on the motor shaft)
- 1x washer
- backplate
- Propeller (incl. Adaptor rings)
- Spinner cap
- 2x srews (7,5x2,6mm)
Attach the smallest adaptor rings in the socket of both sides
of the propeller
.
Turn the female screws till the end of the thread. Put the
backplate on the motor shaft.
Attach the propeller on the motor shaft.
!! MAKE SURE THAT YOU ARE ASSEMBLING THE
HELICOPTER IN THE CORRECT WAY. THE
DESCRIPTIONS ON THE PROPELLER MUST POINT TO
THE MOTOR.
Fix the propeller with the washer and the other female screw
on the motor shaft. Pull the female screw tight.
Finally attach the spinner cap on the motor shaft and fix it
with the screws.
